Ngôn ngữ : Tiếng Việt

Tiếng Việt

  • f
  • tw
  • y
  • in
  • p
  • ins
screw extruder machine
Tin tức

Four Cavity PVC Conduit Pipe Extrusion Line Commissioning Succeed

Feb 02, 2021


Four Cavity PVC Conduit Pipe Extrusion Line is WONPLUS advantage machine, single pipe line speed can reach 5-7m/min, which means one time can make 20-28m/min, it's a very good propossal for electric conduit pipe production.


Main Features:

1. Production capacity: The daily capacity of the traditional one is about 3 tons and the one of WONPLUS four-pipe extrusion line is 5-8 tons.

2. Power consumption: For per ton output, the power consumption of the traditional on is 200Kwh and WONPLUS four-pipe extrusion line is 80Kwh.

3. Water and air consumption: WONPLUS optimized cooling water channel and air circuit make the water and air consumption is 25% of the one of the traditional one.

4. The floor area: WONPLUS haul-off and cutter is in all-in-one design and the floor area is about half of the traditional one.

5. Manpower resources: The number of the necessary staff for both of the extrusion lines is two.

6. The noise pollution: The saw of traditional cutter makes piercing noise while WONPLUS chip-less cutter cutting without noise.

7. Dust pollution: The traditional saw cutting cause severe dust pollution and the material tend to be wasted. And the one of WONPLUS chip-less cutting causes no dust.


đăng ký bản tin

đăng ký chương trình khuyến mãi hàng tháng của chúng tôi và nhận sản phẩm mới nhất tin tức!

để lại lời nhắn
để lại lời nhắn
Nếu Bạn quan tâm đến sản phẩm của chúng tôi và muốn biết thêm thông tin chi tiết, vui lòng để lại tin nhắn tại đây, chúng tôi sẽ trả lời bạn ngay khi có thể

Trang Chủ

Các sản phẩm

trong khoảng

tiếp xúc